Key takeaways
- When price closes through an order block, the original idea has failed — but the zone often still matters.
- A breaker block is a failed order block that formed after a liquidity sweep and is later retested from the other side.
- A mitigation block is a failed order block that formed without sweeping liquidity first.
- Both are used as flipped support or resistance, with stops on the far side of the zone.
No order block holds forever. The question is not whether zones fail but what you do when they do. In smart money concepts, a failed order block can turn into one of two new setups — a breaker block or a mitigation block — and both rest on the same simple idea: old support can become new resistance, and the other way round.
What happens when an order block fails
Suppose you marked a bullish order block. Price comes back and, instead of bouncing, closes straight through the bottom of the zone. That close tells you buyers who defended the area last time were overwhelmed. Many of them are now trapped in losing positions.
When price later rallies back up to that same zone from below, those trapped buyers are glad to get out near breakeven. Their selling, combined with new sellers who noticed the failure, can turn the old support into resistance.
The breaker block
The textbook breaker block forms in four stages:
- Price makes a low, rallies to a high, then sweeps below the low (taking sell-side liquidity).
- It then reverses hard and closes above the high — a structure break up.
- The bullish order block from the original rally has now failed; the last up candle before the sweep is the breaker.
- When price pulls back into that zone, it is watched as support.
The bearish version is the mirror image: a sweep above a high, a break below the low, and the old bearish zone retested from below as resistance.
The mitigation block
A mitigation block looks similar but skips the sweep. Price fails to make a new extreme — for example a lower high in what was an uptrend — and then breaks structure. The order block from the failed leg becomes the mitigation block.
The name comes from the idea that participants trapped in the failed move use the retest to reduce (“mitigate”) their losses by closing at a better price.
Breaker vs mitigation
| Breaker block | Mitigation block | |
|---|---|---|
| Liquidity sweep before the break | Yes — a new high or low is made first | No — the failed leg falls short |
| What it signals | Stops were taken, then the trend flipped | Momentum faded, then the trend flipped |
| How it is traded | Retest of the failed zone from the other side | Retest of the failed zone from the other side |
| Invalidation | Close back through the far edge | Close back through the far edge |
In practice, the trade mechanics are almost identical. The label simply records whether a liquidity sweep came first — which some traders treat as extra confirmation.
Trading a flipped zone
- Wait for the break to be clear. A full candle close beyond the old block, ideally with displacement and a fair value gap.
- Wait for the retest. The setup only exists when price returns to the old zone from the new side.
- Stops go beyond the zone. If price closes back through, the flip has failed too and you step aside.
- Target the opposite liquidity. For a bearish breaker, the nearest untaken lows below. See liquidity sweeps.
The more labels you learn, the easier it becomes to explain any chart after the fact. Before using breakers or mitigation blocks with real money, write down your exact rules and test them on past data — our risk management guide covers how to judge whether the results are good enough.
Frequently asked questions
Why does the scanner delete a block that closes through instead of showing a breaker?
The scanner focuses on active, unbroken order blocks so the board stays clean. Failed zones are removed the moment a candle closes through them. You can still see where they were by scrolling the chart, and this guide explains how to treat them manually.
Is a breaker block stronger than a normal order block?
Not inherently. Some traders like breakers because the failure itself is informative — it shows that the side that built the original block was overwhelmed. But the same rules apply: structure, freshness and a clear invalidation level matter more than the label.